Guides

IMPORTANT If you are having trouble Adding to Cart Email support@penguinchillers.com

Commercial Water Chillers

Estimated Lead Time: 4–6 Weeks
In-Stock: 5-Ton Titanium Model: 1 currently in stock.

2 Ton: 24,000 BTU/hr
5 Ton: 60,000 BTU/hr
1 Year Warranty Included
Proudly Made in Tennessee, USA
Outdoor Rated & Pad Mount Ready

For orders outside of the continental US, please call us at 1-865-214-6509 or email us at support@penguinchillers.com.

From $6,999.99

Size

Heat Exchanger

Freight

Clear

Pay Over Time with Bread Pay™

About This Product:

Our Commercial Water Chillers are built for demanding cooling applications that require dependable performance, durable construction, and flexible configuration options. Available in 2 Ton and 5 Ton models, these outdoor-rated units are built on a 304 stainless steel frame and are pad mount ready for commercial and industrial installations. Multiple heat exchanger options are available to help match your system’s fluid compatibility and operating requirements.

*Please note: the product photo shown in this listing is our 5 Ton Commercial Water Chiller. The 2 Ton model will appear slightly different with a smaller condenser on top of the unit.*

More Info:

Specifications

2 Ton

5 Ton

Cooling Capacity (BTU/hr)

24,000

60,000

Inlet / Outlet

1.5″ Slip Connections

Heat Exchanger Options

PVC/Copper, PVC/Titanium, 316 SS Shell & Coil

PVC/Copper, PVC/Titanium , 316 SS Shell & Coil

Voltage

208–240V

Amps

17.7A

35.6A

Phase

Single Phase

Dimensions (W × D × H)

34″W × 47″D × 50″H

34″W × 47″D × 63″H

Weight

245 lbs

333 lbs

Frame

304 Stainless Steel

Warranty

1 Year Product Warranty

Heat Exchanger Options

PVC Shell / Copper Coil

A dependable option for many general-purpose water cooling applications.
Copper heat exchanges are not recommended for closed loop reef/aquarium applications. Choose titanium for reef-safe systems.
Suitable for working pressures up to 10 PSI

PVC Shell / Titanium Coil

Recommended for applications where copper exposure is a concern.
Reef Tank Safe and highly corrosion resistant.
Ideal for marine, reef, and other sensitive water systems.
Suitable for working pressures up to 10 PSI

316 Stainless Steel Shell & Coil

Designed for higher pressure applications.
Suitable for working pressures up to 50 PSI.
Also available for anodizing baths containing up to 15% sulfuric acid.

Pump Recommendations

Recommended Pump: Danner Magnetic Drive 2400 GPH – 3600 GPH

Other pumps may be acceptable, however they must be rated for less than 10 PSI max pressure (for PVC shell heat exchanger only).
If you’re using a pool/spa pump or another pump rated in horsepower, check compatibility before installation. (for PVC shell heat exchangers only)
There is often a simple workaround that allows our chillers to cool higher pressure systems successfully. please contact support for more information.

Controller Notes

The controller constantly monitors your system’s incoming water temperature, therefore water flow is needed at all times to read current temperatures accurately.
When your water temperature rises above your desired set point, the controller tells the compressor to turn on and begin cooling.
Once your desired set point temperature is reached, the compressor will turn off.

Manufacturer Guidelines

Outdoor rated / pad mount ready: Install on a stable, level surface with adequate clearance for airflow.
Continuous water flow is required for proper temperature monitoring and operation.
Units include a built-in flow switch designed to disable the chiller in the event of pump failure.
PVC shell pressure guidance: If you’re using a pump capable of higher pressures (often pumps rated in HP), verify compatibility before installation.
Copper option notice: Copper heat exchangers are not recommended for closed loop reef/aquarium applications. Choose titanium for reef-safe systems.
Condensation may occur depending on operating temperature and ambient humidity; plan your installation accordingly.

Commercial Water Chiller Size Comparison:

Model	BTU/hr	Connections	Electrical	Dimensions	Weight
2 Ton	24,000	1.5″ Slip	208–240V / 17.7A / Single Phase	34″W × 47″D × 50″H	245 lbs
5 Ton	60,000	1.5″ Slip	208–240V / 35.6A / Single Phase	34″W × 47″D × 63″H	333 lbs

2 Ton

BTU/hr

24,000

Connections

1.5″ Slip

Electrical

208–240V / 17.7A / Single Phase

Dimensions

34″W × 47″D × 50″H

Weight

245 lbs

5 Ton

BTU/hr

60,000

Connections

1.5″ Slip

Electrical

208–240V / 35.6A / Single Phase

Dimensions

34″W × 47″D × 63″H

Weight

333 lbs

American Owned and Operated

Penguin Chillers manufactures chillers in Knoxville, Tennessee USA and is an official member of the Made in Tennessee program, recognizing products built locally with verified Tennessee craftsmanship.

Have questions about which configuration is right for your setup? We’re here to help.

✉ Support@PenguinChillers.com

☎ 1-865-214-6509

Call us during business hours to connect with a real person at our Knoxville office.