1 HP High Efficiency (HE) Water Chiller

Description

1 HP (HE) Water Chiller

• 11,500 BTU/hr
• 1″ NPT inlet/outlet ports (female threaded PVC)
• Titanium Heat Exchanger = Reef Tank Safe
• Recommended operating range ~40°F to ~100°F
• 59 dBA
• 6′ Power Cord
• 110 – 120 Volts / 7.2 Amps / 830 Watts  
• 19.25”W x 19.75”D x 14.25”H
• 60 Pounds
• 1 Year  Product Warranty
• Proudly made in the USA

Our 1 HP HE Water Chiller comes with a titanium heat exchanger. A titanium heat exchanger keeps copper from coming into contact with your water. Because toxic levels of copper can build up in water being used for long periods of time, copper heat exchangers aren’t recommended for use in a closed loop aquarium setup. The use of titanium = Reef Tank Safe!
Please note: Our standard line of Penguin Chillers are not intended for outdoor use. Place set-up in area that can withstand wetness, moisture, and/or condensation.

Pump and Controller Recommendation

• Pump: Danner Mag-drive 500gph – 1800gph. Other pumps may be acceptable, however they need to be rated for less than 10psi max pressure. If you’re using a different pool/spa pump or any other pump rated in horsepower please talk with our tech support first. There is typically a simple work around that allows our chillers to provide cooling to systems which operate at higher pressures. We would be more than happy to help you determine the best method of installation for your system. Be sure and visit our “Accessories” web page to view our selection of pumps and accessory packages available.
• Digital Controller: The controller constantly monitors your systems incoming water temperature, therefore, water flow is needed at all times in order for it to successfully read current temperatures. When your systems water temperature moves above your desired set point, the controller tells the compressor and fan to turn on and begin cooling the water. Once your desired set point temperature is reached, the compressor and fan will turn off.
• High Efficiency: HE models utilize a larger titanium coil compared to the standard version. The larger coil offers more contact surface area and contact time to provide more cooling. Both models run the same compressor, which means their power draw is the same. The high efficiency model is providing more cooling without any extra power consumption.

Water Chiller Comparison Chart

Additional Accessories Available

Penguin Chillers offers a wide variety of accessories and support equipment for our chillers.

Accessories offered:

• Water or Glycol pumps
• Quick Disconnects
• Vinyl or Silicone Tubing
• Propylene Glycol
• Pump Controller
• Accessory Packages

American owned and operated, Penguin Chillers manufactures a variety of chillers in Knoxville, TN. Purchase your chiller directly from us and we will continue offering you quality service throughout the life of your unit. If you need liquid of any sort cooled, we’re here to help. Contact us at Support@PenguinChillers.com. 

Penguin Chillers current applications: 

Drag Racing –  Brewing – Bait Tanks – Marine & Reef Tanks – Distilling – Lobster Tanks – Wineries – Hydroponics – Cold Therapy – Aquaponics – Lasers – Research Science – Electroplating – Computers – Printing Presses – Injection Molding – Milk/Butter/Candy/Pasta/Food Production – Extractions – Craft Soda – Hyperbaric Chambers – Waste Water Treatment – Welding – 3d Printing